Network Egress QoS Policy Forwarding Class Commands
Page 188 7210 SAS D, E, K OS Quality of Service Guide
Sample for 7210 SAS-K
*A:SAH01-051>show>qos# network 1 detail
Label Description
Policy-Id
The ID that uniquely identifies the policy.
Egr Remark
Description
A text string that helps identify the policy’s context in the con-
figuration file.
Forward Class/
FC Name
Specifies the forwarding class name.
Profile
Out —
Specifies the Dot1p marking for the packets which are
out-of-profile, egressing on this queue.
In — Specifies the Dot1p markings for in-profile packets egressing
this queue.
Frame-based —
Specifies that the meters associated with this
policy account for the packet framing overheads (such as for
Ethernet the IFG and preamble), while accounting the band-
width to be used by the flow.
DOT1P Class Specifies the dot1p-classification policy ID that is
being used for mapping the packets to different FC
under the FCs based on the dot1p bits. Supported only
on 7210 SAS-K.
DSCP classifica-
tion
Specifies the dscp-classification policy ID that is
being used for mapping the packets to different FC
under the FCs based on the dscp bits. Supported only
on 7210 SAS-K.
High Slope Non
Ring
Specifies the non-ring high-slope policy values
Low Slope Non Ring Specifies the non-ring low-slope values.
High Slope Ring Specifies the ring high-slope values.
Slope Policies Displays the slope policies applied to the queues.
To Next Page
Loading...
Need help?
General
