Generic Commands
Page 208 7210 SAS D, E, K OS Quality of Service Guide
Operational Commands
copy
Syntax copy network-queue src-name dst-name [overwrite]
Context config>qos
Description
This command copies or overwrites existing network queue QoS policies to another network
queue policy ID.
The copy command is a configuration level maintenance tool used to create new policies using
existing policies. It also allows bulk modifications to an existing policy with the use of the
overwrite keyword.
Parameters network-queue src-name dst-name — Indicates that the source policy ID and the destination policy ID are
network-queue policy IDs. Specify the source policy ID that the copy command will attempt to copy
from and specify the destination policy ID to which the command will copy a duplicate of the policy.
overwrite — specifies to replace the existing destination policy. Everything in the existing destination
policy will be overwritten with the contents of the source policy. If overwrite is not specified, a mes-
sage is generated saying that the destination policy ID exists.
SR>config>qos# copy network-queue nq1 nq2
MINOR: CLI Destination "nq2" exists - use {overwrite}.
SR>config>qos# copy network-queue nq1 nq2 overwrite
To Next Page
Loading...
Need help?
General
