Service Meter QoS Policy Commands
Page 346 7210 SAS D, E, K OS Quality of Service Guide
dot1p-classification
Syntax dot1p-classification [policy-id] [detail]
Context show>qos
Description This command displays dot1p-classification QoS policy information.
Parameters policy-id — Displays information about the specific policy ID.
detail — Displays detailed policy information.
Sample output
A:SAH01-050>config>qos>sap-ingress# show qos dot1p-classification 10
===============================================================================
DOT1P Classification Maps
===============================================================================
-------------------------------------------------------------------------------
Dot1P Class Id : 10
Description : (Not Specified)
-------------------------------------------------------------------------------
A:SAH01-050>config>qos>sap-ingress#
A:SAH01-050>config>qos>sap-ingress# show qos dot1p-classification 10 detail
===============================================================================
DOT1P Classification Maps
===============================================================================
-------------------------------------------------------------------------------
Dot1P Class Id : 10
Description : (Not Specified)
-------------------------------------------------------------------------------
Dot1P Bit Map Forwarding Class Profile
-------------------------------------------------------------------------------
6 h1 None
7 nc None
Label Description
Dot1P Class Id
The ID that uniquely identifies the policy.
Dot1P Bit Map
The Dot1p value specified in the policy
Forwarding Class
The forwarding class to assigned to the packet if the received
packet's Dot1p values match the Dot1p value configured.
Description
A text string that helps identify the policy’s context in the con-
figuration file.
Profile
Specifies the profile to be assigned to the packet.
To Next Page
Loading...
Need help?
General
