Alcatel-Lucent 7330 - Page 396

5 — VoIP overview
5-50 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
enable_supp_ring Indicates whether the
suppressed ringing service is
enabled. This is a string
containing a value of “yes” or
“no.” The default value is “no”.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
enable_forced_hold Indicates whether the forced
hold behavior is enabled for an
emergency call. This is a string
containing a value of “yes” or
“no.” This is an optional
parameter. The default value is
“no.”
NYAll
except
package
C, D, E,
I-240W-
S ONT
Yes TL1 using
CALLPROGTR
AN set to 40
using
ent-profile-v
oipappservic
e
CLI using
emer-ser-org
-hold
using
configure
voice ont
voip-app-serv
ice
supp_ring_offhook_t
imer
The time interval within which
the device must go offhook for a
suppressed ringing call. This is a
non-negative integer. The value
is expressed in seconds. The
default value is 5.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
supp_ring_interrupt
_timer
The time interval within which
the device must go onhook if a
suppressed ringing call is
interrupted. This is a
non-negative integer. The value
is expressed in seconds. The
default value is 2.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
conference_uri The URI of the conference server
to be used for the 6-way
conference service.
NYPackage
A, B, H
only
Yes TL1 using
CONFURIPRO
FID using
ent-profile-v
oipappservic
e
CLI using
conf-prof
using
configure
voice ont
voip-app-serv
ice
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(8 of 30)