Alcatel-Lucent 7330 - Page 395

5 — VoIP overview
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 5-49
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
enable_3wc Indicates whether 3-way
conference service is enabled.
This is a string containing a value
of “yes” or “no.” The default
value is “no.”
NYAll Yes TL1 using
CALLPROGTR
AN set to 1
using
ent-profile-v
oipappservic
e
CLI using
three-way-ca
lling
using
configure
voice ont
voip-app-serv
ice
enable_6wc Indicates whether 6-way
conference service is enabled.
This is a string containing a value
of “yes” or “no.” The default
value is “no.”
NYPackage
A, B, H
only
Yes TL1 using
CALLPROGTR
AN set to 80
using
ent-profile-v
oipappservic
e
CLI using
six-way-callin
g using
configure
voice ont
voip-app-serv
ice
enable_transfer Indicates whether the call
transfer service is enabled. This
is a string containing a value of
“yes” or “no.” The default value
is “no”.
NYAll
except
I-240W-
S
Yes TL1 using
CALLPROGTR
AN set to 2
using
ent-profile-v
oipappservic
e
CLI using
call-transfer
using
configure
voice ont
voip-app-serv
ice
enable_hold Indicates whether the call hold
service is enabled. This is a string
containing a value of “yes” or
“no.” The default value is “no”.
NYAll Yes TL1 using
CALLPROGTR
AN set to 4
using
ent-profile-v
oipappservic
e
CLI using
call-hold
using
configure
voice ont
voip-app-serv
ice
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(7 of 30)