Alcatel-Lucent 7330 - Page 409

5 — VoIP overview
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 5-63
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
etsi_cw_merge This parameter contains the
service code to be used to merge
the 2-call waiting sessions and
transition into a 3-way call with
mixing in the ONT. If this
property is not configured or is
configured to contain the empty
string, the ONT disables the
merge sessions operation for the
line in question.
Valid values are in the form “Rd,
where d represents '0'-'9' or '*' or
'#'. An invalid value causes the
ONT to act as if this parameter
was not configured. This
parameter only has meaning if
the enable_esti parameter is set
to “yes”. The default is an empty
string.
All lines of I-240W-S ONT should
be configured the same (* and #
are not supported on the
I-240W-S ONT).
NYAll
except
package
C, D,
and E
No, value is
derived
from
FTP/default
line profile.
N/A
cw_alert_timer This parameter specifies the
value, in seconds, of the
duration for which the user is
allowed to answer a call waiting
call. The default is 120 seconds.
All lines of I-240W-S ONT should
be configured the same.
NYAll
except
package
C, D,
and E
No, value is
derived
from
FTP/default
line profile.
N/A
enable_dead_line_t
one
This parameter controls ONT
behavior with respect to playing
a “dead line tone” when the user
goes off-hook and either:
• the line is unregistered
• the PON is unavailable
• addressing could not be
obtained from the DHCP
server
The default is “no”, indicating
that no tone is output in either
case.
YYAll
except
package
C, D, E,
and
I-240W-
S ONT
No, value is
derived
from
FTP/default
line profile.
N/A
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(21 of 30)