NTP 103 — Install a B-0404G-B business ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 103-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
4 Place the business ONT unit:
a On a flat surface, go to step 5.
b In an outdoor enclosure, go to step 6.
5 Place the business ONT unit on a flat surface, such as a desk, resting horizontally.
Go to step 9.
6 Wall-mount the outdoor enclosure for the B-0404G-B business ONT.
a Open the access cover on the outdoor enclosure by loosening the pin-in-hex
screw.
b Secure the outdoor enclosure to the mounting area at the subscriber
premises. Use the appropriate hardware as defined by local installation
practices. Mount the outdoor enclosure using the specified mounting holes as
shown in Figure NTP 103-1.
Note — Observe the following:
• The access cover of the outdoor enclosure must be open to access
the three mounting holes used to secure the outdoor enclosure to
the wall.
To Next Page
Loading...
