11 — B-8102-A and B-8112-A unit data sheet
11-8 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
Table 11-5 Business ONT LEDs (B-8102-A and B-8112-A)
Notes
(1)
The VID LED is only functional for RF video-equipped ONT (B-8112-A).
(2)
See the SLID configuration information in SLID and LED behavior for a description of SLID output mode LEDs.
Table 11-6 describes the two LEDs provided on business ONT RJ-45 connectors.
Indicator LED color and behavior LED behavior description
ONT
PWR Off
Green solid
Not powered
Power is available
BTRY Off
Green solid
Battery alarm set or battery not provisioned
Battery good, charged, and there is no battery alarm
FAIL Off
Red solid
Equipment 100% operational
Equipment failure or not ranged or synchronized
VID
(1)
Off
Red solid
Video signal above acceptable level or not provisioned
Video signal below acceptable level
DATA Off
Green solid
No link or data not provisioned
Link active
NTWK Off
Green solid
1490 nm data path is unavailable
1490 nm data path is available
MGMT Off
Green solid
Green flashing
No communication between the P-OLT and the ONT
Full communication between P-OLT and the ONT
ONT is disabled
Ethernet port
LINK Off
Green solid
Flashing green
Not detected
Link detected
Link detected and activity is present
MODE Off
Green solid
Green flashing
10 Mb/s operation
100 Mb/s operation
1000 Mb/s operation
DS1/E1 port
SF Off
Green solid
Yellow solid
Not provisioned
Link operational
Rx link or Rx facility problem ENV.397 (LOS, LOF, BER, and so on)
EQPT Off
Red solid
Not provisioned
TDM equipment problem ENV.374
When device is not connected to the PON
POTS
(2)
Off
Green flashing periodic
Green flashing patterned
No SLID activity and all phones on-hook
SLID input mode
Provisioned SLID in SLID output mode
When device is connected to the PON
POTS Off
Green solid
All phones are on-hook, POTS is not provisioned, or no phones connected
Any customer is off-hook
To Next Page
Loading...
