IP Router Configuration Command Reference
94 Router Configuration Guide
—no cflowd-parameters
— sampling {unicast | multicast} type {acl | interface} [direction {ingress-
only | egress-only | both}]
—no sampling {unicast | multicast}
— cpu-protection policy-id
—no cpu-protection
— description description-string
—no description
— dhcp
— description description-string
—no description
— gi-address ip-address [src-ip-addr]
—no gi-address
— [no] option
— action {replace | drop | keep}
—no action
— circuit-id [ascii-tuple | ifindex | sap-id | vlan-ascii-tuple]
—no circuit-id
— remote-id [
mac | string string]
— [no] vendor-specific-option
— [no] client-mac-address
— [no] pool-name
— [no] port-id
— [no] service-id
— string text
—no string
— [no] system-id
— python-policy policy-name
—no python-policy
— [no] relay-plain-bootp
— server server1 [server2...(up to 8 max)]
—no server
— [no] shutdown
— [no] trusted
— dist-cpu-protection policy-name
—no dist-cpu-protection
— egress
— filter ip ip-filter-id
— filter ipv6 ipv6-filter-id
—no
filter [ip ip-filter-id] [ipv6 ipv6-filter-id]
— [no] enable-ingress-stats
— [no] enable-mac-accounting
— hold-time
— up ip seconds
—no up ip
— up ipv6 seconds
—no up ipv6
— down ip seconds [init-only]
—no down
— down ipv6 seconds [init-only]
—no down ipv6
— icmp
— [no] mask-reply
— redirects [number seconds]
To Next Page