Configuring IPMVLAN Configuring IP Multicast VLAN
page 43-10 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Deleting IPMVLAN
To remove an IPMVLAN, use the no form of the vlan ipmvlan command by entering no vlan ipmvlan
followed by the IPMVLAN ID, as shown below:
-> no vlan ipmvlan 1003
To remove multiple IPMVLANs, specify a range of IPMVLAN IDs. For example:
-> no vlan ipmvlan 1010-1017
Assigning and Deleting IPv4/IPv6 Address
The following subsections describe how to assign an IPv4 or IPv6 address to an existing
IPMVLAN as well as delete the same with the vlan ipmvlan address command.
Assigning an IPv4/IPv6 Address to an IPMVLAN
To assign an IPv4 or IPv6 address or range of addresses to an existing IPMVLAN, use the vlan ipmvlan
address command as shown in the examples below:
-> vlan ipmvlan 1003 address 225.0.0.1
-> vlan ipmvlan 1033 address ff08::3
-> vlan ipmvlan 1033 address 226.0.1.0/24
-> vlan ipmvlan 1033 address 224.1.1.7-224.1.1.9
-> vlan ipmvlan 1033 address ffae::7-ffae::9
Deleting an IPv4/IPv6 Address from an IPMVLAN
To delete an IPv4 or IPv6 address from an existing IP Multicast VLAN, use the no form of the
vlan ipmvlan address command by entering no vlan ipmvlan followed by the IPMVLAN ID, the
keyword address, and either the IPv4 or IPv6 address, as shown below:
-> no vlan ipmvlan 1003 address 225.0.0.1
-> no vlan ipmvlan 1033 address ff08::3
-> no vlan ipmvlan 1033 address 226.0.1.0/24
-> no vlan ipmvlan 1033 address 224.1.1.7-224.1.1.9
-> no vlan ipmvlan 1033 address ffae::7-ffae::9
Assigning and Deleting a Customer VLAN Tag
The following subsections describe how to assign and delete a customer VLAN tag (c-tag) in an IPMV-
LAN using the vlan ipmvlan ctag command.
Assigning C-Tag to an IPMVLAN
To assign c-tag to an IP Multicast VLAN, use the vlan ipmvlan ctag command as shown below:
-> vlan ipmvlan 1003 ctag 10
To Next Page
Loading...
