Alcatel-Lucent OmniSwitch 6850-48 - Switch Logging Specifications

Switch Logging Specifications Using Switch Logging
page 46-2 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Switch Logging Specifications
Platforms Supported OmniSwitch 6400, 6800, 6850, 6855, and 9000
Functionality Supported High-level event logging mechanism that forwards
requests from applications to enabled logging
devices.
Functionality Not Supported Not intended for debugging individual hardware
applications.
Logging Devices Flash Memory/Console/IP Address
Application ID Levels Supported IDLE (255), DIAG (0), IPC-DIAG (1), QDRIVER
(2), QDISPATCHER (3), IPC-LINK (4), NI-
SUPERVISION (5), INTERFACE (6), 802.1Q (7),
VLAN (8), GM (9), BRIDGE (10), STP (11),
LINKAGG (12), QOS (13), RSVP (14), IP (15),
IPMS (17), AMAP (18), GMAP (19), SLB(25),
AAA (20), IPC-MON (21), IP-HELPER (22),
PMM (23), MODULE (24), EIPC (26), CHASSIS
(64), PORT-MGR (65), CONFIG (66), CLI (67),
SNMP (68), WEB (69), MIPGW (70), SESSION
(71), TRAP (72), POLICY (73), DRC (74), SYS-
TEM (75), HEALTH (76), NAN-DRIVER (78),
RMON (79), TELENET (80), PSM (81), FTP (82),
SNMI (83), DISTRIB (84), EPIL0GUE (85),
LDAP (86), NOSNMP (87), SSL (88), DBGGW
(89), LANPOWER (108)
Severity Levels/Types Supported 2 (Alarm - highest severity), 3 (Error),
4 (Alert), 5 (Warning) 6 (Info - default),
7 (Debug 1), 8 (Debug 2), 9 (Debug 3 - lowest
severity)