Alcatel-Lucent OmniSwitch 6850-48 - Valid Port Settings on Omniswitch 6850 Series Switches

Ethernet Ports Overview Configuring Ethernet Ports
page 1-6 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
See the OmniSwitch 6800 Series Hardware Users Guide for more information about the OmniSwitch 6800
hardware that is supported in the current release.
Valid Port Settings on OmniSwitch 6850 Series Switches
This table below lists valid speed, duplex, and autonegotiation settings for the different OmniSwitch 6850
Series port types.
See the OmniSwitch 6850 Series Hardware Users Guide for more information about the OmniSwitch 6850
hardware that is supported in the current release.
OmniSwitch 6800-48
(ports 49–50)
Fiber XFP 10000 full No
Chassis Type
(Port Nos.)
Port Type User-Specified
Port Speed
(Mbps)
Supported
User-Specified
Duplex
Supported
Auto
Negotiation
Supported?
OmniSwitch 6850-24
(ports 1–20)
Non-combo RJ-45 auto/10/100/
1000
auto/full/half Yes
OmniSwitch 6850-24
(ports 21–24)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent
OmniSwitch 6850-24
(ports 25–26)
Fiber XFP 10000 full No
OmniSwitch 6850-48
(ports 5–48)
Non-combo RJ-45 auto/10/100/
1000
auto/full/half Yes
OmniSwitch 6850-48
(ports 1–4)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent
OmniSwitch 6850-48
(ports 49–50)
Fiber XFP 10000 full No
OmniSwitch 6850-U24X
(ports 1–22)
Non-combo SFP Dependent Dependent Dependent
OmniSwitch 6850-U24X
(ports 23–24)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent
OmniSwitch 6850-U24X
(ports 25–26)
Fiber XFP 10000 full No
Chassis Type
(Port Nos.)
Port Type User-Specified
Port Speed
(Mbps)
Supported
User-Specified
Duplex
Supported
Auto
Negotiation
Supported?