Alcatel-Lucent OmniSwitch 6850-48 - 802.1 AB Specifications; 802.1 AB Defaults Table

802.1AB Specifications Configuring 802.1AB
page 19-2 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
802.1AB Specifications
802.1AB Defaults Table
The following table shows the default settings of the configurable 802.1AB parameters.
IEEE Specification IEEE 802.1AB-2005 Station and Media Access
Control Connectivity Discovery
TIA Specifications TIA-1057 - Link Layer Discovery Protocol for
Media Endpoint Devices
Platforms Supported (LLDP-MED added in
6.3.4)
OmniSwitch 6400, 6800, 6850, 6855, and 9000
Transmit time interval for LLDPDUs 5 to 32768 in seconds
Transmit hold multiplier value 2 to 10
Transmit delay 1 to 8192 in seconds
Reinit delay 1 to 10 in seconds
Notification interval 5 to 3600 in seconds
Parameter Description Command Default Value/Comments
Transmit time interval for LLDPDUs lldp transmit interval 30 seconds
Transmit hold multiplier value lldp transmit hold-multiplier 4
Transmit delay lldp transmit delay 2 seconds
Reinit delay lldp reinit delay 2 seconds
Notification interval lldp notification interval 5 seconds
LLDPDUs transmission lldp lldpdu Transmission and Reception
Per port notification lldp notification Disable
Management TLV lldp tlv management Disable
802.1 TLV lldp tlv dot1 Disable
802.3 TLV lldp tlv dot3 Disable
LLDP Media Endpoint Device lldp tlv med Disable