EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6850-48 - BFD Defaults

Alcatel-Lucent OmniSwitch 6850-48
1162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring BFD BFD Defaults
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 30-3
BFD Defaults
The following table shows the default settings of the configurable BFD parameters.
Parameter Description Command Default Value/Comments
BFD global status for the switch
ip bfd-std status Disabled
Global transmit time interval for BFD
control packets
ip bfd-std transmit 100 milliseconds
Global receive time interval for BFD
control packets.
ip bfd-std receive 100 milliseconds
Global operational mode and echo
status
ip bfd-std mode Asynchronous mode with the
echo function enabled
Global BFD echo packet time interval
ip bfd-std echo interval 100 milliseconds
Global Layer 2 hold-down (conver-
gence) timer value.
ip bfd-std l2-hold-timer 500 milliseconds
Administrative status of a BFD inter-
face
ip bfd-std interface status Disabled
Transmit time interval for a BFD
interface.
ip bfd-std interface transmit 100 milliseconds
Receive time interval for the BFD
interface.
ip bfd-std interface receive 100 milliseconds
BFD interface dead interval multi-
plier.
ip bfd-std interface multiplier 3
Echo time interval for the BFD inter-
face
ip bfd-std interface echo-
interval
100 milliseconds
Operational mode and echo status for
the BFD interface.
ip bfd-std interface mode Asynchronous mode with
the echo function enabled.
Layer 2 hold-down (convergence)
timer value for the BFD interface
ip bfd-std interface l2-hold-
timer
500 milliseconds
BFD status for the OSPF protocol ip ospf bfd-std status Disabled
BFD status for an OSPF interface ip ospf interface bfd-std Disabled
BFD session status with all neighbors
of the corresponding interface which
are greater than or equal to “2-way”
state
ip ospf interface bfd-std all-nbrs Enabled
BFD status for the BGP protocol ip bgp bfd-std status Disabled
BFD status for BGP neighbors ip bgp neighbors bfd-std Disabled
BFD status for VRRP protocol vrrp bfd-std Disabled
BFD status for a VRRP tracking pol-
icy.
vrrp track address bfd-std Enabled
BFD status for a static route. ip static-routes bfd-std status Disabled

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6850-48

Related product manuals