Alcatel-Lucent OmniSwitch 6850-48 - Verifying 802.1 AB Configuration

Verifying 802.1AB Configuration Configuring 802.1AB
page 19-12 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Verifying 802.1AB Configuration
To display information about the ports configured to handle 802.1AB, use the following show command:
For more information about the resulting display, see Chapter 27, “802.1AB Commands,” in the
OmniSwitch CLI Reference Guide.
show lldp system-statistics Displays system-wide statistics.
show lldp statistics Displays port statistics.
show lldp local -system Displays local system information.
show lldp local -port Displays port information.
show lldp local-management-address Displays the local management address information.
show lldp remote-system Displays local port information of remote system.
show lldp remote-system med Displays MED local port information of remote system.