Alcatel-Lucent OmniSwitch 6850-48 - Displaying Learned Port Security Information

Displaying Learned Port Security Information Configuring Learned Port Security
page 3-12 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Displaying Learned Port Security Information
To display LPS port and table information, use the show commands listed below:
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show port-security and show port-security shutdown
commands is also given in “Sample Learned Port Security Configuration” on page 3-3.
port-security learn-trap-threshold Displays Learned Port Security (LPS) configuration and table
entries.
show port-security shutdown Displays the amount of time during which source learning can
occur on all LPS ports.