Alcatel-Lucent OmniSwitch 6850-48 - Chapter 5 Configuring GVRP; GVRP Specifications; GVRP Defaults

GVRP Specifications Configuring GVRP
page 5-2 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
GVRP Specifications
GVRP Defaults
The following table lists the defaults for GVRP configuration:
IEEE Standards Supported
IEEE Std. 802.1D - 2004, Media Access Control
(MAC) Bridges
IEEE Draft Std. P802.1Q-REV/D5.0
Platforms Supported
OmniSwitch 6400, 6850, 6855, and 9000
Maximum GVRP VLANs 4094
256 (OmniSwitch 6400)
Parameter Description Command Default Value/Comments
Global status of GVRP gvrp disabled
Status of GVRP on specified port gvrp port disabled
Transparent switching gvrp transparent switching disabled
Maximum number of VLANs gvrp maximum vlan 1024
Registration mode of the port gvrp registration normal
Applicant mode of the port gvrp applicant participant
Timer value for Join timer, Leave timer,
or LeaveAll timer
gvrp timer Join timer value: 600 ms
Leave timer value: 1800 ms
LeaveAll timer value:
30000 ms
Restrict dynamic VLAN registration gvrp restrict-vlan-registration not restricted
Restrict VLAN advertisement gvrp restrict-vlan-advertise-
ment
not restricted
Restrict static VLAN registration gvrp static-vlan restrict not restricted
Maximum VLANs learned through
GVRP
gvrp maximum vlan 256