Verifying the 802.1X Port Configuration Configuring 802.1X
page 37-12 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Verifying the 802.1X Port Configuration
A summary of the show commands used for verifying the 802.1X port configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
802.1x captive-portal address Displays information about ports configured for 802.1X.
show 802.1x users Displays a list of all users (supplicants) for one or more 802.1X ports.
show 802.1x non-supplicant Displays a list of all non-802.1x users (non-supplicants) learned on one
or more 802.1x ports.
show 802.1x statistics Displays statistics about 802.1X ports.
show 802.1x device
classification policies
Displays Access Guardian 802.1x device classification policies config-
ured for 802.1x ports.
show 802.1x auth-server-down Displays information about the Access Guardian Captive Portal config-
uration.
show aaa authentication 802.1x Displays information about the global 802.1X configuration on the
switch.
show aaa accounting 802.1x Displays information about accounting servers configured for 802.1X
port-based network access control.
show aaa authentication mac Displays a list of RADIUS servers configured for MAC based authenti-
cation.
To Next Page
Loading...
