Configuring ERP Verifying the ERP Configuration
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 14-21
Verifying the ERP Configuration
A summary of the show commands used for verifying the ERP configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
show erp Displays the ERP configuration information for all rings, a specific ring,
or for a specific ring port.
show erp protected-vlan Displays the protected VLAN configuration for all ERP rings or for a
specific ring.
show erp statistics Displays the ERP statistics for all rings, a specific ring, or a specific ring
port.
show ethernet-service Displays configuration information for VLAN Stacking Ethernet ser-
vices, which includes SVLANs and NNI port associations.
show ethernet-service nni Displays the VLAN Stacking NNI configuration.
show ethernet-service vlan Displays a list of SVLANs configured fro the switch.
To Next Page
Loading...
