IP Overview Configuring IP
page 24-6 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Additional IP Protocols
There are several additional IP-related protocols that may be used with IP forwarding. These protocols are
included as part of the base code.
• Address Resolution Protocol (ARP)—Used to match the IP address of a device with its physical
(MAC) address. For more information, see “Configuring Address Resolution Protocol (ARP)” on
page 24-12.
• Virtual Router Redundancy Protocol (VRRP)—Used to back up routers. For more information, see
Chapter 32, “Configuring VRRP.”
• Internet Control Message Protocol (ICMP)—Specifies the generation of error messages, test packets,
and informational messages related to IP. ICMP supports the ping command used to determine if hosts
are online. For more information, see “Internet Control Message Protocol (ICMP)” on page 24-29.
• Router Discovery Protocol (RDP)—Used to advertise and discover routers on the LAN. For more
information, see Chapter 29, “Configuring RDP.”
• Multicast Services—Includes IP multicast switching (IPMS). For more information, see Chapter 42,
“Configuring IP Multicast Switching.”
To Next Page
Loading...
