Configuring GVRP Verifying GVRP Configuration
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 5-13
Verifying GVRP Configuration
A summary of the commands used for verifying GVRP configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
clear gvrp statistics Clears GVRP statistics for all the ports, an aggregate of ports, or a spe-
cific port.
show gvrp last-pdu-origin Displays the source MAC address of the last GVRP message received
on a specified port or an aggregate of ports.
show gvrp configuration Displays the global configuration for GVRP.
show gvrp configuration port Displays the GVRP configuration status for all the ports.
show gvrp configuration link-
agg/port
Displays the GVRP configuration for a specific port or an aggregate of
ports.
show gvrp timer Displays the timer values configured for all the ports or a specific port.
To Next Page
Loading...
