Configuring Ethernet Ports Ethernet Ports Overview
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 1-5
Valid Port Settings on OmniSwitch 6400 Series Switches
This table below lists valid speed, duplex, and autonegotiation settings for the different OmniSwitch 6400
Series port types.
See the OmniSwitch 6400 Series Hardware Users Guide for more information about the OmniSwitch
6400 hardware that is supported in the current release.
Valid Port Settings on OmniSwitch 6800 Series Switches
This table below lists valid speed, duplex, and autonegotiation settings for the different OmniSwitch 6800
Series port types.
Chassis Type
(Port Nos.)
Port Type User-Specified
Port Speed
(Mbps)
Supported
User-Specified
Duplex
Supported
Auto
Negotiation
Supported?
OmniSwitch 6400-24/P24
(ports 1-4)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent
OmniSwitch 6400-24/P24
(ports 5-24)
Non-Combo RJ-45 auto/10/100/
1000
auto/full/half Yes
OmniSwitch 6400-48/P48
(ports 1-4)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent
OmniSwitch 6400-48/P48
(ports 5-48)
Non-Combo RJ-45 auto/10/100/
1000
auto/full/half Yes
OmniSwitch 6400-U24/
U24D
(ports 1-2)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent
OmniSwitch 6400-U24/
U24D (ports 3-24)
Non-Combo SFP Dependent Dependent Dependent
Chassis Type
(Port Nos.)
Port Type User-Specified
Port Speed
(Mbps)
Supported
User-Specified
Duplex
Supported
Auto
Negotiation
Supported?
OmniSwitch 6800-24
(ports 1–20)
Non-combo RJ-45 auto/10/100/
1000
auto/full/half Yes
OmniSwitch 6800-24
(ports 21–24)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent
OmniSwitch 6800-48
(ports 1–44)
Non-combo RJ-45 auto/10/100/
1000
auto/full/half Yes
OmniSwitch 6800-48
(ports 45–48)
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
RJ-45: auto/full/
half
SFP: Dependent
RJ-45: Yes
SFP: Dependent