Verifying VLAN Rule Configuration Defining VLAN Rules
page 8-22 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Verifying VLAN Rule Configuration
To display information about VLAN rules configured on the switch, use the following show command;
For more information about the resulting display from this command, see the OmniSwitch CLI Reference
Guide. An example of the output for the show vlan rules command is also given in “Sample VLAN Rule
Configuration” on page 8-3.
show vlan rules Displays a list of rules for one or all VLANs configured on the switch.
To Next Page
Loading...
