802.1Q Specifications Configuring 802.1Q
page 21-2 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
802.1Q Specifications
Note. Up to 4093 VLANs can be assigned to a tagged port or link aggregation group. However, each
assignment counts as a single VLAN port association. Once the maximum number of VLAN port associa-
tions is reached, no more VLANs can be assigned to ports. For more information, see the chapter titled
Chapter 6, “Assigning Ports to VLANs.”
802.1Q Defaults Table
The following table shows the default settings of the configurable 802.1Q parameters.
802.1Q Defaults
IEEE Specification Draft Standard P802.1Q/D11 IEEE Standards for
Local And Metropolitan Area Network: Virtual
Bridged Local Area Networks, July 30, 1998
Platforms Supported OmniSwitch 6400, 6800, 6850, 6855, and 9000
Maximum Tagged VLANs per Port 4093
Maximum Untagged VLANs per Port One untagged VLAN per port.
Maximum VLAN Port Associations (VPA)
per switch
32768
Maximum 802.1Q VLAN port associations
per switch
2500 (OmniSwitch 6400)
Force Tag Internal Not configurable on the OmniSwitch 6400, 6800,
6850, 6855, and 9000
Parameter Description Command Default Value/Comments
What type of frames accepted vlan 802.1q frame type Both tagged and untagged
frames are accepted
To Next Page
Loading...
