Dynamic Link Aggregation Specifications Configuring Dynamic Link Aggregation
page 23-2 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Dynamic Link Aggregation Specifications
The table below lists specifications for dynamic aggregation groups and ports:
IEEE Specifications Supported 802.3ad — Aggregation of Multiple Link Segments
Platforms Supported OmniSwitch 6400, 6800, 6850, 6855, and 9000
Maximum number of link aggregation groups 32 (per standalone switch or a stack of switches)
Range for optional group name 1 to 255 characters
Number of links per group supported 2, 4, or 8
Group actor admin key 0 to 65535
Group actor system priority 0 to 65535
Group partner system priority 0 to 65535
Group partner admin key 0 to 65535
Port actor admin key 0 to 65535
Port actor system priority 0 to 255
Port partner admin key 0 to 65535
Port partner admin system priority 0 to 255
Port actor port 0 to 65535
Port actor port priority 0 to 255
Port partner admin port 0 to 65535
Port partner admin port priority 0 to 255
CLI Command Prefix Recognition All dynamic link aggregation configuration com-
mands support prefix recognition. See the “Using the
CLI” chapter in the OmniSwitch AOS Release 6
Switch Management Guide for more information.
To Next Page
Loading...
