Configuring Server Load Balancing Configuring the Server Farm
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 44-13
6 Select MS Loopback Adapter from the Adapter pull-down window.
7 Click the Select an IP address radio button.
8 Enter the Virtual IP (VIP) address in the IP Address window.
Note. Use the same subnet mask as for the physical IP interface.
9 Click the OK button.
Select the “MS Loopback
Adapter” from the
“Adapter” pull-down
window.
Select the “Select
an IP address”
radio button.
Enter the VIP
address here.
Click “OK” when
done.
To Next Page
Loading...
