Configuring Server Load Balancing Configuring the Server Farm
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 44-17
5 Select MS Loopback Adapter in the Select Network Adapter window.
6 Click the OK button.
7 Select the proper frame type in the Frame Type pull-down menu.
8 Click the OK button.
9 Load the CD or floppy disc with the Microsoft loopback adapter.
10 If needed, enter the file and path name of the Microsoft loopback adapter in the Windows NT Setup
window.
11 Click the Continue button. All the necessary files will be copied and installed on your workstation.
Select “MS Loopback
Adapter”.
Click “OK” when
done.
Select “Frame Type”.
Click “OK” when
done.
Click “Continue” when
done.
Enter the file and path name
here.
To Next Page
Loading...
