Monitoring Switch Health Diagnosing Switch Problems
page 45-42 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
The following sections include a discussion of CLI commands that can be used to configure resource
parameters and monitor or reset statistics for switch resources. These commands include:
• health threshold—Configures threshold limits for input traffic (RX), output/input traffic (TX/RX),
memory usage, CPU usage, and chassis temperature. See page 45-43 for more information.
• show health threshold—Displays current health threshold settings. See page 45-44 for details.
• health interval—Configures sampling interval between health statistics checks. See page 45-45 for
more information.
• show health interval—Displays current health sampling interval, measured in seconds. See page
45-45 for details.
• show health —Displays health statistics for the switch, as percentages of total resource capacity. See
page 45-46 for more information.
• health statistics reset—Resets health statistics for the switch. See page 45-47 for details.
To Next Page
Loading...
