Alcatel-Lucent OmniSwitch 6850-48 - Page 1149

OmniSwitch AOS Release 6 Network Configuration Guide September 2009 Index-1
Index
qos log lines command 40-19
qos port servicing mode command 40-26
qos stats interval command 40-23
Numerics
10 Gigabit Ethernet
see Ethernet
10/100/1000 ports
defaults 1-3
802.1AB 19-1
defaults 19-2
specifications 19-2
verify information about 19-12
802.1p
trusted ports 40-28
802.1Q 21-1
application examples 21-8
defaults 21-2
enabling notification 19-8
enabling tagging 21-5
frame type 21-6
overview 21-3
specifications 21-2
trusted ports 40-5, 40-28
verify information about 21-10
802.1Q ports
trusted 40-28
802.1X 34-13, 37-1
accounting 37-7
and DHCP 37-6
components 37-5
defaults 37-2
port authorization 37-9
port parameters 34-22, 37-9
port timeouts 37-9
re-authentication 37-6, 37-10
specifications 34-3, 37-2
802.1x command 37-2
802.1x initialize command 37-11
802.1x re-authenticate command 37-11
802.3ad
see dynamic link aggregation
A
aaa accounting 802.1x command 37-11
aaa accounting vlan command 36-32, 36-35
aaa ace-server clear command 35-8
aaa authentication 802.1x command 34-21, 37-8
and 802.1X port behavior 37-6
aaa authentication vlan multiple-mode command 36-32
aaa authentication vlan single-mode command 36-32
aaa avlan default dhcp command 36-31
aaa avlan dns command 36-29
aaa avlan http language command 36-8
aaa ldap-server command
LDAP authentication 35-27
aaa radius-server command 34-21, 37-8
RADIUS authentication 35-14, 35-16
aaa vlan no command 36-26
Access Control Lists
see ACLs
access list 28-15
creating 28-15
accounting servers 36-35
ACE/Server
for authentication 35-8
ACLs
application examples 39-3, 39-4, 41-4, 41-22
bridged traffic 41-6
defaults 39-2, 41-3
disposition 41-5, 41-7
interaction with VRRP 32-10, 32-19
Layer 2 41-11
Layer 2 application examples 41-12
Layer 3 41-12
Layer 3 application examples 41-13
multicast 41-14
security features 41-16
verify information about 39-22, 41-20
actions
combined with conditions 40-8, 40-9
creating policy actions 40-34
for ACLs 41-10
Address Resolution Protocol
see ARP
advertisements 29-6
destination address 29-9
IP address preference 29-10
lifetime 29-10
transmission interval 29-9
Alcatel Mapping Adjacency Protocol 20-1
alerts 46-8
AMAP
see Alcatel Mapping Adjacency Protocol
amap common time command 20-6
amap disable command 20-5
amap discovery time command 20-5
amap enable command 20-5
Application example
Learned Port Security Configuration 3-3
application example
Ethernet OAM 15-7
MST 12-14
MSTI 12-16
VLAN Stacking 24-2, 24-35
application examples
802.1Q 21-8
ACLs 39-3, 39-4, 41-4