Quick Steps for Configuring Dynamic Link Aggregation Configuring Dynamic Link Aggregation
page 23-6 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
An example of what these commands look like entered sequentially on the command line on the partner
switch:
-> lacp linkagg 2 size 8 actor admin key 5
-> lacp agg 2/1 actor admin key 5
-> lacp agg 3/1 actor admin key 5
-> lacp agg 3/3 actor admin key 5
-> lacp agg 3/6 actor admin key 5
-> lacp agg 5/1 actor admin key 5
-> lacp agg 5/6 actor admin key 5
-> lacp agg 8/1 actor admin key 5
-> lacp agg 8/3 actor admin key 5
-> vlan 2 port default 2
To Next Page
Loading...
