Configuring Authenticated VLANs Setting Up Authentication Clients
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 36-25
1 To configure the DHCP parameters, access the AV-Client configuration utility and select the DHCP
tab. The following screen displays:
2 Click the box next to “Enable DHCP Operations”. Several options will activate in the utility window as
shown in the following screen. When you click on a box next to an option, the option is activated in the
configuration window.
3 When you click one of the features, an indicator is activated directly below the feature. Specify the
number of seconds for the delay for the selected feature.
To Next Page
Loading...
