Ametek Sorensen Asterion AST Series - Mechanical Specifications; Regulatory Agency Compliance

DC Asterion Series Overview
M330460-01 Rev A 1-9
Vibration
MIL-PRF-28800F, Class 3; 5-500 Hz per Paragraph 4.5.5.3.1
Shock
MIL-PRF-28800F, Class 3; 30G half-sine with 11ms duration per
Paragraph 4.5.5.4.1
Transportation Integrity
ISTA Test Procedure 1A
1.2.12 Mechanical Specifications
Parameter
Specification
Dimensions
H, 1.75” (44.45 mm); W (front panel), 19.0” (483mm); D, 24.0” (609.6mm);
H, 1.75” (44.45 mm); W (chassis), 16.9” (483mm); D, 23.0” (584mm).
Unit Weight
28lbs
Shipping Weight
34lbs
Chassis
Steel with plastic front panel
Chassis Finish
Galvanized Zinc, G90
Installation
Protective covers are provided for AC input and DC output;
rackmount: per ANSI-EIA-310-D, with front panel mounting flange brackets and chassis
provisions for mounting rack slides; slides and flange brackets/handles options available.
Cooling
Force-air cooling; linear, variable fan speed control; air intake at front/sides and exhaust
at rear.
Acoustic Noise
68 dBA, maximum; measured at 1 m with A-weighting.
1.2.13 Regulatory Agency Compliance
Parameter
Specification
EMC
CE marked for EMC Directive 2014/30/EV per EN61326-1:2013, Class-A for
emissions and immunity as required for the EU CE Mark.
Safety
CSA NRTL certified for US and Canada to CAN/CSAC22.2 No. 61010112,
UL 61010-1 Third Edition. CE marked for LVD compliance 2014/35/EV to
EN 61010-1 Third Edition as required for the EU CE mark.
CE Mark LVD Categories
Installation Overvoltage Category: ΙΙ; Pollution Degree: 2; Class II equipment;
indoor use only.
RoHS
CE marked for compliance with EU Directive 2011/65/EU for Restriction of
Hazardous Substances in Electrical and Electronic Equipment.