Ametek Sorensen Asterion AST Series - DC Output, Remote Sense, and Wire Gauge Selection

Overview DC Asterion Series
2-12 M330460-01 Rev A
2.9 DC output power connection
Figure 2-6. DC Output Busbar
Output Power of the DC-Asterion series is through bus bars (POS and NEG) and the
size could vary depending on the voltage and power models. For example, see Figure
2-6 for 40V-60V models. Table 2-4 provides output power connection descriptions.
Refer to Table 2-5 for input/output lug recommendations.
Power Supply Type
Connection Description
1.7 kW to 5 kW, 40V-60V models
Bus bars with holes for M8 bolts on each terminal (POS. and
NEG.)
Table 2-4. DC Output Power Connections
Manufacturer
Low Current
High Current
Panduit
P, PV, or PN series, or
equivalent
Standard stranded wire: LCA
Series, or equivalent
Flexible stranded wire: LCAX
Series, or equivalent
Note: Contact lug manufacturer for recommended crimping tool.
Table 2-5. Recommended Lugs
2.10 Remote Sense
The Remote Sense Connector , RVS, is located on the rear panel. Figure 2-7 shows
the rear panel view of the connector, and Table 2-6 lists the connector type.