Overview DC Asterion Series
3-4 M330460-01 Rev A
3.1.3 Dashboard Screen Top-Level Menu
The DASHBOARD screen top-level menu is used to change output parameters and
simultaneously view output measurements. The most commonly used output
parameters are in the DASHBOARD screen menu. The DASHBOARD screen is the
default menu that is displayed after power-on, refer to Figure 3-7.
Refer to Section 3.1.2.1 for navigating to Dashboard Screen.
Figure 3-7. Dashboard Screen in CC/CV Mode
The following selections are available in the DASHBOARD screen top-level menu.
Entry Description
Setting
VOLTAGE Programs the output voltage of the supply in volts. Real-time
setting is possible using the rotary encoder.
CURRENT Programs the output current in amps. Real-time setting is
possible using the rotary encoder.
POWER Programs the power in constant power mode for power regulation
in KW. Real-time setting is possible using the rotary encoder.
NOTE: The unit will operate in Constant Power Mode if power limit
is set.
Measure
VOLTAGE Displays the floating-point value of the DC output voltage in volts.
CURRENT Displays the floating-point value of the DC output current in
amps.
POWER Displays the floating-point value of the DC output power in
KW.
3.1.3.1 REAL-TIME PARAMETER ADJUSTMENT
The DASHBOARD screen menu provides the capability for output parameter entry
that has real-time, immediate effect on the output. This allows manual adjustment of
the output parameters where tuning of a value is desired. Enabling this function
To Next Page
Loading...
