Ametek Sorensen Asterion AST Series - Operation and Control of DC Asterion Series; Front Panel Display and Navigation

M330460-01 Rev AB 3-1
3
OPERATION
3.1 Front Panel Display Menu and Functionality
3.1.1 Power-Up Screens
At initial power-on, the display shows the AST-DC Splash screen, Refer to Figure 3-1,
followed by the Start-Up screen with the manufacturer, model number, serial number,
firmware revisions and last calibration date, Refer to Figure 3-2, and finally the
Dashboard screen, Refer to Figure 3-7.
Figure 3-1. Splash Screen
Figure 3-2. Power-On Screen Displaying Model & Version
If output is enabled in Power-ON Settings (PONS) screen, refer to Figure 3-32 and
supply is in Local mode, a warning screen is shown, Refer to Figure 3-3, before the
Dashboard Screen.
It warns the user that the output will be enabled at the end of 10 second countdown.
The process can be aborted by pressing the ABORT button on the screen.
Once aborted, the output remains off until the user enables it with the Output On/Off
button.