Ametek Sorensen Asterion AST Series - Figure 3-47. Power Reference Mode

Overview DC Asterion Series
3-20 M330460-01 Rev A
Figure 3-47. Power Reference Mode
OVP Ref. Mode Sets the power-on default value of the Over-voltage Reference
Mode, refer to Figure 3-48. NOTE: Resistive and 4-20mA
source is not applicable to external OVP programming.
Figure 3-48. OVP Reference Mode
Voltage Average Sets the power-on default value of the voltage average
Samples samples, refer to Figure 3-49.
Figure 3-49. Voltage Average Samples
Current Average Sets the power-on default value of the current average
Samples samples, refer to Figure 3-50.
Figure 3-50. Current Average Samples