DC Asterion Series Overview
M330460-01 Rev A 2-5
2.6 Outline drawings
Figure 2-2 shows the outlines and overall dimensions for installation of the 1U front
panel version (Enhanced) of the Asterion DC Series power source.
Figure 2-3 shows the rear panel view of the power source and locations of the rear
panel connectors. Figure 2-4 shows the protective covers installation for the AC input
and DC output. Item-A, as shown in Figure 2-4, using M4 0.7 KEPS nuts with a
maximum tightening torque of 1.1 Nm (10 lb-in). The components comprising the
covers are supplied in the ship kit.
To Next Page
Loading...
