Ametek Sorensen Asterion AST Series - Figure 3-36. Power on Current Setting

DC Asterion Series Overview
M330460-01 Rev A 3-17
Figure 3-36. Power On Current Setting
Output State Sets the default output enable condition at power on, refer to
Figure 3-37. “ON” enables the output at next power on.
Figure 3-37. Power On Output Setting
Regulation Mode Sets the power-on default value of the Regulation Mode, refer
to Figure 3-38.
Figure 3-38. Regulation Mode
OVP Sets the power-on default value of the Over Voltage Protection,
refer to Figure 3-39.
Figure 3-39. Power On OVP Setting
Output Sense The Output Sense menu allows user to set the output voltage
sense of the unit to either Internal or External, refer to Figure