Ametek Sorensen Asterion AST Series - Figure 3-76. Current Reference Mode Screen

Overview DC Asterion Series
3-30 M330460-01 Rev A
Figure 3-76. Current Reference Mode Screen
Power Ref Mode: Configures the Power Reference Mode, refer to Figure 3-77. When
Power reference mode is selected as External, the Power setting
field in Dashboard screen will be disabled and Power setting field
in Dashboard will display equivalent power setting from external
program source.
NOTE: When Analog Ref. Source is selected as Resistive, FSC
(Full Scale) unit will change to k Ohms. When external Ref.
Source is selected as 4-20mA, FSC will not be applicable.
Figure 3-77. Power Reference Mode Screen
OVP Ref Mode: Configures the Over Voltage Protection Reference Mode, refer to
Figure 3-78.
NOTE: Resistive and 4-20mA source is not applicable to external
OVP programming.
Figure 3-78. OVP Reference Mode Screen