M330460-01 Rev A 2-1
2
INSTALLATION
2.1 Inspection
Inspect the shipping carton for possible damage before unpacking the unit. Carefully
unpack the equipment. Save all packing materials until inspection is complete. Verify
that all items listed on the packing lists have been received. Visually inspect all exterior
surfaces for dented or damaged exterior surfaces, and broken connectors, display, or
controls. External damage might be an indication of internal damage.
If any damage is evident, immediately contact the carrier that delivered the unit and
submit a damage report. Failure to do so could invalidate future claims. Direct repair
issues to AMETEK Customer Service Department at 858-458-0223 (local) or 1-800-
733-5427 (toll free in North America).
2.2 Contents of Shipment
Depending on the model, configuration, and options selected for your Asterion Series
power source, the ship kit may include additional parts and accessories.
Minimum items included in the ship kit (P/N 5330339-01R):
1. AMETEK CD-ROM (P/N M550008-01) containing the Asterion DC Series User
Manual (P/N M330460-01), and the Asterion DC Series Programming Manual
(P/N M330461-01).
2. Remote Sense mating connector:
• 40V-60V models, (Molex P/N 856-390-03) with loose contacts (Molex
P/N 856-390-00).
3. Analog programming and external user control interface connector: Mating
connector normally shipped with unit attached to the rear panel (P/N 856-044-
01).
4. Input power mating connector (P/N 893-004-41) and Lug for earth connection
(P/N 107-240-156).
To Next Page
Loading...
