Ametek Sorensen Asterion AST Series - Figure 3-82. System Settings Screen (Version)

Overview DC Asterion Series
3-32 M330460-01 Rev A
Firmware Displays information about the configuration of the power
Version source. It has information such as manufacturer, model number,
serial number, firmware version and Last Calibration Date. This
information helps identify the unit. Refer to Figure 3-82.
Figure 3-82. System Settings Screen (Version)
Hardware Limits Displays the hardware parameter limit values. Refer to Figure 3-83.
Figure 3-83. System Settings Screen (Hardware Limits)
Language Selects the language of the display menus: German, English,
Spanish, French, Russian, Japanese, Chinese, or Korean. Refer to
Figure 3-84.
Figure 3-84. System Settings Screen (Language)
LCD Brightness Sets the brightness of the LCD backlight, as a percentage of the
maximum that is available; the default setting is 70%. Tapping on
the Right or Left arrow buttons or selecting them with the encoder
and clicking the encoder switch, will increment/decrement the
brightness by 10%, respectively. Refer to Figure 3-85 and Figure
3-86.
LCD Calibration User Can calibrate the touchscreen with this utility for better
accuracy of the Touch. Refer to Figure 3-85 and Figure 3-87. Follow
the on screen guide to complete the calibration.