EasyManua.ls Logo

Amoul i6 - Daily Shift Equipment Check List; Defibrillator Monitor Daily Inspection Checklist

Amoul i6
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93
Time Interval of
Measurement
Continuous
Measurement Mode
Mainstream
Start-up Time
< 10 s
Response Time
< 120 ms
Calibration
Automated continuous self-calibration
Manual calibration is not required
Pressure Compensation
With automatic barometric pressure compensation
Relative Humidity
10- 90 % (no condensation)
Accuracy (based on an
atmospheric pressure of
1 mmHg and no CO
2
during the inhalation
phase)
± 4 mmHg (≤ 40 mmHg)
Reading of± 10 % (40 mmHg< CO
2
76 mmHg)
Reading of ± 12 % (76 mmHg
CO
2
100 mmHg)
Accuracy of Respiratory
Rate
1/min
Deviation Due to Negative Effect of Gas and Fluid
Gas or Fluid
Concentration
Deviation from measured value (the measured
CO
2
value is 38 mmHg)
Oxygen(O
2
)
100 %
-1.3 mmHg
Nitrous Oxide
(N2O)
80 %
+ 6.5 mmHg
Halothane
4 %
+ 0.6 mmHg
Enflurane
5 %
+ 1.5 mmHg
Isoflurane
5 %
+ 1.7 mmHg
Sevoflurane
6 %
+ 2.7 mmHg
Desflurane
24 %
+ 6.6 mmHg
A dry mixture containing 5 % of CO
2
(38 mmHg) at 1 kPa and the remaining is N2.
21.7 Recording Specifications
Recording Specifications
Recording Mode
High-resolution thermal dot matrix printing
Recording Channel
A maximum of 3 waveforms can be produced simultaneously
Paper Speed
12.5 mm/s, 25 mm/s and 50 mm/s, the error is± 5 %
Width of the Recording
50 mm

Table of Contents

Related product manuals