Amoul i6 - Alarm Parameter Settings; Clear Technical Alarms; Technical Alarm List

76
19.2.4 Alarm Parameter Settings
Configuration Items
Options/Range
Default
Alarm Sound Switch
On, Off
On
Alarm Volume
Level 1-10
Level 8
Alarm Pause Time
1/2
2 minutes
ECG Off Priority
High, Medium, Low
Low
SpO
2
Off Level
High, Medium, Low
Low
HR Alarm Switch
On, Off
On
HR Alarm Level
Medium, High
High
CO
2
Alarm Switch
On, Off
On
CO
2
Alarm Level
Medium, High
Medium
SpO
2
Alarm Switch
On, Off
On
SpO
2
Alarm Level
Medium, High
Medium
PR Alarm Switch
On, Off
On
PR Alarm Level
Medium, High
Medium
NIBP Alarm Switch
On, Off
On
NIBP Alarm Level
Medium, High
Medium
Temp Alarm Switch
On, Off
On
Temp Alarm Level
Medium, High
Medium
19.2.5 Clear Technical Alarms
After the technical alarm occurs, press the [Alarm Pause] button to clear the alarm prompt
to different degrees. The attributes of clear technical alarms fall into the following three
categories:
 Can be completely cleared
For technical alarms that can be completely cleared, the sound, light and text message of
the alarm will all be cleared after the [Alarm Sound Pause] button is pressed. Even if the system
returns to the normal alarm state, no prompt will be given. If the technical alarm is triggered
again, the system will give a normal prompt.
 Not Clearable
For technical alarms that cannot be cleared, press the [Alarm Sound Pause] button and no
sound prompt will be given, but the alarm light and text message will still be given normally. After
returning to the normal alarm state, if the alarm condition still exists, the system will continue to
give out alarms as usual.
19.2.6 Technical Alarm List
This chapter lists some of the most important physiological and technical alarm messages,
some of which are not necessarily listed.
Note that in this chapter: