Defibrillation
Electrode Category
External defibrillation paddles, multi-function pads, and internal
defibrillation paddles
It supports charging, discharging and energy selection, and has a charging
completion indicator and impedance indicator.
Synchronous
Discharge Delay
Time
Less than 60 ms (From R wave peak)
External Manual
Defibrillation
Internal Manual
Defibrillation
Manual defibrillation energy
selection range
1/2/3/4/5/6/7/8/9/10/15/20/
30/50/70/100/120/150/170/2
00/300/360J
1/2/3/4/5/6/7/8/9/10/15/20/
30/50J
Defibrillation Charging Specifications (with ambient temperature at 20℃)
From power on
to completion
of charging
From the start
of the heart
rhythm analysis
to the
completion of
charging
From power on
to completion
of charging
Using a fully charged
new battery
Use a fully charged
new battery
after 15 discharges of
360J
Powered by 90% to
100% of the rated grid
supply voltage
360J defibrillation waveform (Load impedance is 25 Ω, 50 Ω/75 Ω/100 Ω/125Ω/150 Ω and 175 Ω respectively)