Amsco C Series User Manual

7-22
P129394-176 Operator Manual Cycle and Control Value Programming
4. Press FLUSH DURATION and enter the duration time for the
generator flush sequence. Press EXIT to return Screen #48.
Press EXIT again at Screen #48 to return to the Utilities Control
screen (#39). Minimum flush duration time is five minutes. The
control defaults to a five-minute flush duration as shipped.
7.5.6 Language The AMSCO C Series sterilizer is capable of operation with display
screens and printouts in two of three languages. The factory default
is ENGLISH. A BILINGUAL option can be used to easily change
languages between shifts or whenever necessary.
1. To access this utility, press the MENU touch screen pad from the
main status screen (#1) at the operating end of the sterilizer. The
screen changes to show the Change Machine Setup screen
(#20).
2. Press the LANGUAGE touch screen pad on the Change
Machine Setup screen (#20). The display advances to show
Select Language screen (#28).
3. Select the appropriate language by pressing one of the touch
screen pads in the middle of the display.
4. The BILINGUAL option can be selected to allow operators to
toggle between English and the other language available without
entering Change Machine Setup. The other language touchpad
appears on the main menu. In this way, another language can
be selected during operation without going to the CHANGE
MACHINE SETUP menu.
5. Once the appropriate language is selected press EXIT to return
to the Change Machine Setup screen (#20).
SELECT LANGUAGE
BILINGUAL ALLOWS TWO LANGUAGES WHICH CAN BE
SWITCHED AT THE CYCLE MENU
28
ENGLISH SPANISH FRENCH
BILINGUAL EXIT

Amsco C Series Specifications

General

Brand	Amsco
Model	C Series
Category	Laboratory Equipment
Language	English