Analog Devices ADRV9002 User Manual

Preliminary Technical Data UG-1828
Rev. PrC | Page 279 of 338
Rx1/Rx2/Tx1 used
Tx2 not used
VTX2LO_1P3 (G3)
VTX2LO_1P0 (H3)
Rx1/Rx2/Tx2 used
Tx1 not used
VTX1LO_1P3 (G12) VTX1LO_1P0 (H12)
Rx1/Rx2 used
Tx1/Tx2 not used
VTX2LO_1P3 (G3) VTX2LO_1P0 (H3)
VTX1LO_1P3 (G12) VTX1LO_1P0 (H12)
VDDA_1P8
5% tol.
VDD_1.0V
5% tol.
VDIG_1P0 (L7,L8)
VDD_1P8
5% tol.
VDDA_1P3
2.5% tol.
VDIGIO_1P8 (M7)
VDIG_0P9 (M8)
VCONV_1P8 (G7) VAGPIO_1P8 (G8)
VANA1_1P8 (H13) + External Tx1 pull-ups
VANA2_1P8 (H2) + External Tx2 pull-ups
VRFSYN1_1P3 (E11)
VRFSYN2_1P3 (E4) VAUXSYN_1P3 (E10) VCLKSYN_1P3 (E5)
VRFVC01_1P3 (A10) VRFVC02_1P3 (A5) VCLKVCO_1P3 (G5)
VAUXVCO_1P3 (G10) VANA1_1P3 (C8) VANA2_1P3 (C7) VRFVCO1_1P0 (B9) VRFLO1_1P0 (A9) VRFVCO2_1P0 (B6) VRFLO2_1P0 (A6) VCONV_1P3 (H8) VRX1LO_1P3 (E13)
VRX2LO_1P3 (E2)
VTX1LO_1P3 (G12)
VTX2LO_1P3 (G3) VCLKVCO_1P0 (H5) VAUXVCO_1P0 (H10) VCONV_1P0 (H7) VRX1LO_1P0 (E14)
VRX2LO_1P0 (E1)
VTX1LO_1P0 (H12) VTX2LO_1P0 (H3)
VANA2_1P0 (C6) VANA1_1P0 (C9)
4.7µF
4.7µF
Not connected
4.7µF
Not connected
Standard operating Mode 0
All internal LDOs used
Rx1/Rx2/Tx1/Tx2 used
VCONV_1P8 (G7) VAGPIO_1P8 (G8) VANA1_1P8 (H13) + External Tx1 pull-ups
VANA2_1P8 (H2)
VCONV_1P8 (G7) VAGPIO_1P8 (G8) VANA1_1P8 (H13) VANA2_1P8 (H2) + External Tx2 pull-ups
VCONV_1P8 (G7) VAGPIO_1P8 (G8) VANA1_1P8 (H13) VANA2_1P8 (H2)
VANA2_1P3 (C7) VRX2LO_1P3 (E2)
VTX2LO_1P3 (G3)
VANA2_1P0 (C6)
VTX2LO_1P0 (H3)
VCONV_1P8 (G7) VAGPIO_1P8 (G8) VANA1_1P8 (H13) + External Tx1 pull-ups
VANA2_1P8 (H2)
Rx1/Tx1 used
Rx2/Tx2 not used
VRX1LO_1P3 (E13)
VTX1LO_1P3 (G12)
VTX1LO_1P0 (H12)
VCONV_1P8 (G7) VAGPIO_1P8 (G8)
VANA1_1P8 (H13) VANA2_1P8 (H2) + External Tx1 pull-ups
Rx2/Tx2 used
Rx1/Tx1 not used
VRX1LO_1P0 (E14)
VRX2LO_1P0 (E1)
Figure 265. Power supply modes for different number of active Rx and Tx RF IOs

Analog Devices ADRV9002 Specifications

General

Brand	Analog Devices
Model	ADRV9002
Category	Transceiver
Language	English