Anilam Wizard 900 - Page 101

95
Advanced (ADV) Functions Key (Continued)
To enter a frame-hole pattern:
5. Press
ENT
The DRO displays the following in the message window:
X hole
i
To enter the dimension for hole 1 on the X-axis – for example, 1.00 in. (25.4 mm):
6. Press
ENT
The DRO displays the following in the message window:
hole
i
To enter the dimension for hole 1 on the Y-axis – for example, 1.00 in. (25.4 mm):
7. Press
ENT