Anilam Wizard 900 - Page 102

96
Advanced (ADV) Functions Key (Continued)
The DRO displays the following in the message window:
Qt hole x
To enter the number of holes on the X-axis – for example, 4:
8. Press
ENT
The DRO displays the following in the message window:
X --
X cent
To enter the incremental distance between holes on the X-axis – for example, 1.00 in.
(25.4 mm):
9. Press
ENT
The DRO displays the following in the message window:
Qt hole
To enter the number of holes on the Y-axis – for example, 4:
10. Press
ENT