AOR AR-Mini - Key Functions Explained

INTRODUCTION
11
: Display
@ c (Up) key
●
Press this key to increase the setting
value.
●
Hold down this key to set the
attenuator.
●
Hold down the FUNC key and press
this key to set the VFO, RADIO or
Preset mode.
●
Hold down this and FUNC key to
store a priority channel for priority
scan.
. v (Down) key
●
Press this key to decrease the setting
value.
●
Hold down this key to start the 2VFO
watch.
●
Hold down the FUNC key and press
this key to start the Priority Scan.
●
Hold down this and FUNC key to
store a 2VFO watch channel for the
2VFO watch.
; PWR key
●
Tap this key, will not result in any
command being performed.
●
Press and hold this key to turn the
power on or off.
= External DC jack
●
Remove the external DC jack cover
and insert the DC output plug of an
AA-mini or DC mini for power supply
or charging.
B MODE key
●
Press this key to switch between the
FM, Wide FM, AM and auto mode by
each pressing .
●
Hold down this key to turn a tone
search operation on or off.
●
Hold down the FUNC key and press
this key to select the tone type.
> SCAN key
●
Press this key to start a search in
the VFO mode, or to begin a scan in
Memory mode.
●
Hold down this key to search a
concealed microphone transmitter
frequency.
●
Hold down the FUNC key and press
this key to store the frequencies to
the limit search operation.
●
Hold down this and FUNC key to
change the band in the limit search
operation.
2 V/M key
●
Press this key to switch between VFO
and memory modes.
●
Hold down this key to assign a skip
channel for search or scan.
●
Hold down the FUNC key and press
this key to memorize the frequency
and then name the memorized
frequency.
●
Hold down this and FUNC key to
erase a memory channel.