ADVANCED OPERATION
41
Erasing All Memories in
the Memory Bank
All memory stored in the same memory
bank can be erased simultaneously.
1
Confirm the memory mode is set.
2
Hold down the FUNC key and
press the dial knob to enter the
setting mode.
3
Turn the dial knob to set the
setting mode number 13.
4
Hold down the FUNC key and turn
the dial knob and select the bank
number to be erased.
• Release the FUNC key to select.
5
Hold down the FUNC key and
press the V/M key.
• “WAIT” is displayed for 2 seconds,
and then the memory bank is
erased.
• The memories which are stored in
a same memory bank are erased,
and then next memory bank
number is displayed.
• If cancel this procedure, press the
V/M key to exit.
6
Repeat from step 4 when erasing
other memory.
7
Press the dial knob to setting
mode.
8
To return to the original VFO mode,
press the dial knob or V/M key.
To Next Page
Loading...
